Application (Record)
Using Zoom
SQW0206- 81 -
■
Recording mode:
You can adjust the area of a picture to be taken using zoom.
Move the zoom lever
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
• The zoom speed can be set to one of 2 levels using
the angle at which the zoom lever is moved.
When Extra optical
zoom is set
Optical Zoom range
Zoom bar
Digital Zoom range
i.Zoom range
Zoom ratio
Focus range
• The illustration is an example of when using Extra optical zoom, [i.Zoom], and
[Digital Zoom]. (DMC-TZ70)
■
Using the control ring/control dial for zoom operation
You can perform zoom operation by assigning the [Zoom] setting to the control ring/
control dial. (→135)
When Extra optical
zoom is set
Optical Zoom range
Current zoom position
Digital Zoom range
i.Zoom range
Zoom ratio Focus range
The numeric value displayed is
converted to the equivalent focal length
of a 35 mm film camera.
• The illustration is an example of when the control ring is assigned to [Zoom] in
[Program AE] Mode. (Example of DMC-TZ70 screen)
To Next Page
Loading...
