18 VQT2R48 VQT2R48 19
Setting the Clock (Continued) Setting the Clock
( The Clock is not set when the
camera is shipped.)
If automatically correcting time of day, select [YES]
• To manually set date and time →select [NO].
• To return to the previous screen, press
.
When [PLEASE SET THE HOME AREA] is displayed, press
[MENU/SET]
Set your home area
City or area
name Current time
Difference from GMT (Greenwich Mean Time)
The current time and home area are set.
• [GPS SETTING] turns [ON]. (→85)
■
About automatic time correction
(→89)
To change time setting
When resetting date and time, select [CLOCK SET] from the [SETUP] menu.
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in the camera for 24 hours beforehand.
• Using the GPS function, you can make settings to automatically correct the current
time. (→89)
Select [CLOCK SET] from the [REC] menu or [SETUP] menu
(→22)
Set the date and time (Perform steps and on the previous page.)
Press [MENU/SET]
■
To set local time at travel destination
[WORLD TIME] (→93)
●
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures at a digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
Turn on the power
The power is turned on.
If the language select screen is not
displayed, proceed to step .
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
Playback Mode.)
Press [MENU/SET]
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
Select the
setting
item
Select either [24HRS] or [AM/
PM] for the time display format.
Select the display order for the
day, month, and year ([M/D/Y],
[D/M/Y], or [Y/M/D]).
Change
the values
and
settings
• To cancel → Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
•
To return to the previous screen, press .
Turn on the power again and check the time display.
(Time and date can be displayed by
pressing [DISPLAY] several times.)
Set REC/PLAY switch to before turning on the power.
REC/PLAY switch
Select [CLOCK SET] from the
[SETUP] menu (→22), perform
and .
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in the camera for 24
hours beforehand.
■
To set local time at travel
destination
[WORLD TIME] (→93)
●
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures at a digital photo centre or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
For the operating procedures for the DMC-TZ10/DMC-ZS7 (→17)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
