Panasonic Lumix S1H

Image Stabilizer 2 / 2
70
Lens with no communication compatibility with a LUMIX camera
Body
Other Settings / Functions
[ ] > [ ] > [ Image Stabilizer ]
[ Len Information ]
Operation Mode The setting is switched to [ Normal ] in the [ ] mode.
Body (B.I.S.) / Lens (O.I.S.) This can be set when using other companies’ lenses with an I.S..
When to Active The setting is fixed to [ Normal ] in the [ ] mode.
Image Circle
FULL / S35mm
Focal Length Enter the focal length
I.S. Area
70% / 80% / 90% / 100%
When selecting the four corners with
▲▼◀▶
,
the B.I.S. (body) will works. If vignetting occurs,
set it to a narrower range.
Lens Name Register the lens
• In the default setting, the lens information for 6 lenses with a focal length of between 24mm and 135mm is registered.
Register the lens information and accurately operate the image stabilization.
Increases the correction effects of the image stabilizer and maintains a stable composition
when shooting at a fixed angle.
• When changing the composition during shooting, turn it [ OFF ] and then move the camera.
If it is registered to the Fn button, it can be switched to [ OFF ] during shooting.
Boost I.S. (Video) This feature is NOT available when set to [ ].
7. Video Shooting Assist Functions