Panasonic Lumix S1H Handbook

Image Stabilizer 1 / 2
L-mount Native / PL Mount Lenses
Panasonic Lenses
with
Image Stabilizer Body
and
Lens
Other Companies’ Lenses
with
Image Stabilizer
Body
Body
or
Lens*
Lenses
without
Image Stabilizer Body
69
B.I.S. (Body) or O.I.S. (Lens) can be used depending on the mounted lens.
Panasonic lenses are compatible with the Dual I.S. 2.
• We recommend turning off the image stabilizer function when using a tripod.
[ ] > [ ] > [ Image Stabilizer ]
The 5-axis hybrid image stabilizer will work.
[ E-Stabilization (Video) ]
[ ] > [ ] > [ Image Stabilizer ]
A 2.0
A 1.8
A 1.5
A 1.33
A 1.30
OFF
Set the type of image stabilizer most suitable for the mounted lens.
• [ Boost I.S. (video) ] will be prioritized when [ Boost I.S. (video) ] is set.
[ Anamorphic (Video) ]
Anamorphic Lenses Only when [ ] is set.
All Lenses
* Excluding when shooting 6K/5.9K/5.4K/VFR.
E-Stabilization (Video)
• The angle of view may become narrower when set to [ ON ].
* Firmware must be updated to version 2.0 or later. Body I.S.(Image Stabilizer) suppresses roll movement.
7. Video Shooting Assist Functions

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes