Panasonic Lumix S1H

Time Code
39
Record and input the time codes.
[ ] > [ ] > [ Time Code ]
MOV or AVCHD only. MP4 is not compatible with time codes.
Time Code Display The time code is displayed on the screen.
Count Up
Rec Run* / Free Run
Time Code Value Reset / Manual Input / Current Time
Time Code Mode DF (Drop Frame) / NDF (Non-Drop Frame)**
HDMI Time Code Output The time code information and images are output together.
External TC Setting
The initial values of the time codes of the LUMIX S1H and
external device are synchronized.
* When setting the [Variable Frame Rate], it will be set to [ Rec Run ].
** It will be set to [ NDF ] with the following settings.
When setting [ 50.00Hz (PAL) ] or [ 24.00Hz (CINEMA) ]. When setting 47.95 or 23.98p.
3. HDMI Output and TC IN/OUT