Camera Customization – [Setup] Menu
615
[Monitor Settings]/[Viewfinder]
[Monitor Backlight]/[LVF Luminance]
[Brightness] / [Contrast] / [Saturation] / [Red Tint] / [Blue Tint]
This adjusts the brightness, coloring, and red or blue tints of the monitor/viewfinder.
1 Press 34 to select the setting item, and press 21 to adjust.
2 Press or to confirm the setting.
• It will adjust the monitor when the monitor is in use, and the viewfinder when the
viewfinder is in use.
[AUTO] / [−3] to [+3]
Adjusts monitor/viewfinder luminance.
[AUTO]: The brightness is adjusted automatically depending on how bright it is
around the camera.
• Adjusts the monitor luminance when displaying the monitor, and the viewfinder
luminance when displaying the viewfinder.
• When either [AUTO] is set, or the adjusted value is set to positive side, the usage
period will shorten.
• When [Night Mode] is being used, [Monitor Backlight]/[LVF Luminance] are not
available.
To Next Page
Loading...
