Camera Customization – [Setup] Menu
616
[Eye Sensor]
[Level Gauge Adjust.]
[Sensitivity] [HIGH] / [LOW]
This will set the sensitivity of the eye sensor.
[LVF/Monitor Switch]
[LVF/MON AUTO] (automatic
viewfinder/monitor switching) / [LVF]
(viewfinder) / [MON] (monitor)
This will set the method for switching between the viewfinder and monitor.
• If you press [LVF] to switch the display, the [LVF/Monitor Switch] setting will also
switch.
[Adjust.]
Hold the camera in a horizontal position, and press or . The level gauge
will be adjusted.
[Level Gauge Value Reset]
Restores the default level gauge setting.
To Next Page
Loading...
