To Next PageTo Next Page
Need help?Do you have a question about the Panasonic MBDLN25BL and is the answer not in the manual?
General| Model | MBDLN25BL |
|---|---|
| Category | Servo Drives |
| Manufacturer | Panasonic |
| Rated Current | 2.5 A |
| Continuous Current | 2.5 A |
| Peak Current | 7.5 A |
| Supply Voltage | 200-240 VAC |
| Input Voltage | 200-240 VAC |
| Communication Interface | RS-485 |
| Protection Features | Overvoltage, Undervoltage, Overheating |
Details the model name and product number of the AC Servo Driver.
Details the standard type servo drives, including model numbers and electrical specifications.
Details the multi-function type servo drives, including model numbers and electrical specifications.
Presents fundamental operating and environmental specifications for the servo drivers.
Details pin assignments and specifications for power connectors (XA, XB, XC, XD) and terminal blocks.
Describes the USB connector for computer connectivity and parameter management.
Explains RJ45 connectors for EtherCAT communication and wiring.
Details the connector supporting functional safety features and its pinout.
Describes input and output signal connections for the parallel I/O interface.
Details the connector for feedback scale signals, including power and ground.
Describes the CS signal connector for linear motor communication and its pinout.
Details the connector for analog monitor outputs and signal ground.
Illustrates signal interfaces for various input/output types, including diagrams.
Specifies recommended wire types, maximum cable lengths, and wiring considerations.
Lists connector symbols, part numbers, and manufacturers for connecting cables.
Provides guidelines and diagrams for various wiring connections.
Explains the operation, cases, and precautions for the dynamic brake system.
Provides guidelines on vertical mounting, spacing, and screw tightening for servo drivers.
Lists standards the servo driver complies with (EMC, Low voltage, Machinery directives).
Details compliance with EU directives, including EMC and low voltage requirements.
Specifies installation environment requirements and peripheral device configurations.
Provides a table of peripheral devices recommended for use with servo drivers.
Details UL, South Korean Radio Act, SEMI F47, and Harmonic suppression compliance.
Defines hazard symbols and indicates critical safety actions to avoid injury or damage.
Provides detailed instructions on wiring, handling, environment, and operation for safety.
Covers general handling, maintenance, and operational safety notes for the servo driver.
Explains the importance of ambient temperature and measurement for servo driver longevity.
Defines the servo driver's expected life based on conditions and capacitor degradation.
Provides typical lifespans for key components like the in-rush current relay and cooling fan.
Specifies the warranty period and conditions under which the warranty is exempted.
Defines the scope of warranty responsibility and limitations for company liability.
Outlines the procedure for receiving warranty service and contacting customer support.
