Panasonic MBDLN25BL - CS Signal Connector (X6); Analog Monitor Connector (X7)

No. SX-DSV03335 - 46-
R2.0 Industrial Device Solution Business Unit, Panasonic Corporation
7-7 CS signal connector X6
Name
Symbol
pin No.
Description
CS signal power supply output
E5V
1
CS signal power supply output (Note1)
E0V
2
CS signal power output ground (Note 2)
－
-
3
Do not connect anything to this connector.
CS signal input
CS3
4
CS signal3 input
CS2
5
CS signal2 input
CS1
6
CS signal1 input
Frame ground
FG
shell
Internally connected to the earth terminal.
Note 1) The E5V of the is connected with the terminal No. 1 of the connector X5 (EX5V).
The power supply that can be supplied from E5V and EX5V of X5 is 5 V ± 5% 300 mA MAX.
Note 2) The E0V of the CS signal power output ground is connected with the terminal No. 2 of the connector X5
(EX0V) and control circuit ground of the connector X4 .
7-8 Analog monitor connector X7
Name
Symbol
Pin No.
Description
Input / output
signal interface
Analog monitor output 1
AM1
1
• Analog signal output for monitoring.
• The meaning of the output signal varies depending on the
parameter setting.
Ao-1
Analog monitor output 2
AM2
2
Signal ground
GND
3
• Signal ground
-
Reserved
-
4,5
• Do not connect anything to this connector.
-