MIN: To clean curtains and soft furnishing’s
etc., with tool attached.
MAX: To clean with high suction
continuously on carpets.
D) VARIABLE POWER CONTROL (MC-E469 only)
E) HANDLE ADJUSTMENT BY FOOT PEDAL
To lower the body of the cleaner, step on the pedal at the left rear corner of the vacuum cleaner.
1) Upright position
The handle should be in an
upright position when
cleaning tools are used.
2) Middle position
For normal cleaning, depress
the foot pedal and pull back
the handle to a comfortable
angle and release the pedal to
lower the cleaning head.
3) Low position
For cleaning under furniture,
depress the pedal a second
time. The handle may now be
lowered almost to the floor as
shown.
To Next Page
Loading...
