Panasonic MCDJT3220 - User Manual

Panasonic
LIQI

Summary

General Specifications

Position Control Specifications

Details specifications related to position control, including input/output signals.

Pulse Input and Output

Details command pulse input modes, scaling, and output signals.

Protective Functions

Parameter Class 0: Rotational Direction and Auto-Tuning Setup

Parameter Class 0: Command Pulse and Torque Control

Parameter Class 0: Deviation, Encoder, and Regenerative Setup

Parameter Class 1: Position and Velocity Loop Gains

Parameter Class 1: Feed Forward and Control Switching

Parameter Class 2: Adaptive and Notch Filter Settings

Parameter Class 2: Damping Filter Settings

Parameter Class 4: Input and Output Signal Selection

Parameter Class 5: Electronic Gear and Inhibit Setup

Parameter Class 5: Sequence, Filter, and Level Settings

Parameter Class 5: Torque Limit and Pulse Input Setup

Parameter Class 6: Gain, Compensation, and Stop Time

Parameter Class 6: Auto-Tuning and Warning Mask

Panasonic MCDJT3220 Specifications

General

Protection Functions	Overcurrent, Overvoltage, Undervoltage
Communication Interface	RS-485
Operating Temperature	0°C to 55°C
Humidity	90% RH or less (non-condensing)
Vibration Resistance	5.9 m/s2
Input Voltage	200-230V AC
Storage Temperature	-20 to +85 degree C