Panasonic MCO-170AICUVH Series - Optional Accessories

89
SPECIFICATIONS
Product name
CO
2
incubator
MCO-170AIC
CO
2
incubator
MCO-170AICUV
CO
2
incubator
MCO-170AICUVH
Medical purpose Culture of cell tissues, organs, embryos.
External dimensions W620 mm x D730 mm x H905 mm (W24.4 inch x D28.7 inch x H35.6 inch)
Internal dimensions W490 mm x D523 mm x H665 mm (W19.3 inch x D20.6 inch x H26.2 inch)
Interior volume
165 L (5.83 cu.ft.)
Exterior
Painted steel (Rear cover has no paint)
Interior
Stainless steel containing copper
Outer door Painted steel
Inner door Tempered glass
Trays
4 trays made of stainless steel containing copper
W470 mm x D450 mm x H12 mm (W18.5 inch x D17.7 inch x H0.47 inch)
Maximum load: 7 k
g
/tray
Access port
Inner diameter: 30 mm (1.18 inch), On the back side
Insulation
Extruded polystyrene
Heating system
DHA system (heater jacket + air jacket system)
Heater
295 W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
CO
2
controller PID control system
CO
2
density display Digital display
Air circulation Fan assisted
Air filter 0.3 m, Efficiency: 99.97 % or higher
UV lamp
----- 4 W x 1 (ozone-free emission)
Alarms
Automatic set temperature alarm, Automatic set CO
2
density alarm,
High limit temperature alarm, CO
2
gas, various sensor/heater alarms
Remote alarm contacts Allowable contact capacity: DC 30 V, 2 A
CO
2
inlet connection 4 mm to 6 mm (0.157 inch to 0.236 inch) diameter tube can be connected
CO
2
inlet pressure
0.03 MPa(G) (0.3 kgf/cm
2
(G), 4.3 psi(G))
Weight
80 k
g
Accessories
----- 2 unlock key
4 trays, 1 gas tube, 1 humidifying pan, 2 tube bands
1 removal power supply cord for UK
1 removal power supply cord for EU countries other than UK