Panasonic MCO-170AICUVH Series - Optional Accessories by Function and Stacking

90
SPECIFICATIONS
Product name
CO
2
incubator
MCO-170AIC
CO
2
incubator
MCO-170AICUV
CO
2
incubator
MCO-170AICUVH
Optional accessories
(Refer to table 10)
UV system set (MCO-170UVS) standard equipment
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
standard equipment
H
2
O
2
generator (MCO-HP)
Optional accessories
(Refer to table 11)
Double stacking bracket (MCO-170PS)
Stacking plate (MCO-170SB)
Optional accessories
H
2
O
2
reagent (MCO-H2O2-PE)
Gas regulator (MCO-100L-PW)
Gas auto changer (MCO-21GC-PW)
STD gas auto calibration kit (MCO-SG-PW)
Tray (MCO-170ST: same as that of standard accessory)
Half tray (MCO-25ST)
Roller base (MCO-170RB)
Optional
Software product
Data acquisition system (MTR-5000)
Interface board (MTR-L03); For LAN
Interface board (MTR-480); For RS-232C/RS-485
Optional product
for using in the chamber
Shaker for CO
2
incubator
（
MIR-S100C
）
Note: Refer to the updated catalog when ordering an optional component.
Designs and specifications are subject to change without notice.
Table 10 Optional accessories for each function
MCO-170AIC MCO-170AICUV MCO-170AICUVH
To disinfect by UV
UV system set (MCO-170UVS) standard equipment
To decontaminate
by H
2
O
2.
UV system set (MCO-170UVS)
H
2
O
2
generator (MCO-HP)
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
H
2
O
2
generator (MCO-HP)
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
H
2
O
2
generator (MCO-HP)
To lock
the outer door
Electric lock (MCO-170EL) standard equipment
Table 11 Required bracket/plate for each incubator combination of double stacking
Upper
product
MCO-170AIC
MCO-170AICUV
MCO-170AICUVH
Lower
product
MCO-170AIC
MCO-170AICUV
MCO-170AICUVH
MCO-19AIC
MCO-19AICUV
MCO-19AICUVH
MCO-19M
MCO-19MUV
MCO-19MUVH
MCO-18AC MCO-20AIC
Bracket
Plate
Double stacking
bracket
MCO-170PS
Stacking plate
MCO-170SB