Panasonic MCO-170M Series - Performance Data

100
SPECIFICATIONS
Product name
O
2
/CO
2
Incubator
MCO-170M
O
2
/CO
2
Incubator
MCO-170MUV
O
2
/CO
2
Incubator
MCO-170MUVH
Optional accessories
(Refer to table 12)
UV system set (MCO-170UVS) standard equipment
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
standard equipment
H
2
O
2
generator (MCO-HP)
Optional accessories
(Refer to table 13)
Double stacking bracket (MCO-170PS)
Stacking plate (MCO-170SB)
Optional accessories
H
2
O
2
reagent (MCO-H2O2)
Gas regulator (MCO-100L)
Gas auto changer (MCO-21GC)
STD gas auto calibration kit (MCO-SG)
Tray (MCO-170ST: same as that of standard accessory)
Half tray (MCO-25ST)
Roller base (MCO-170RB)
Interface board (MCO-420MA) (USA only)
Interface board (MTR-L03)*; For LAN
Interface board (MTR-480)*; For RS-232C/RS-485
*Only for the Data acquisition system MTR-5000 user.
Note: Refer to the updated catalog when ordering an optional component.
Designs and specifications are subject to change without notice.
Table 12 Optional accessories for each function
MCO-170M MCO-170MUV MCO-170MUVH
To disinfect by UV
UV system set (MCO-170UVS) standard equipment
To decontaminate
by H
2
O
2.
UV system set (MCO-170UVS)
H
2
O
2
generator (MCO-HP)
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
H
2
O
2
generator (MCO-HP)
H2O2 decon board (MCO-170HB)
Electric lock (MCO-170EL)
H
2
O
2
generator (MCO-HP)
To lock
the outer door
Electric lock (MCO-170EL) standard equipment
Table 13 Required bracket/plate for each incubator combination of double stacking
Upper product
MCO-170M Series
MCO-170AIC Series
Lower product
MCO-170M Series
MCO-170AIC Series
MCO-170AICL Series
MCO-19M Series
MCO-19ML Series
MCO-19AIC Series
MCO-19AICL Series
MCO-18AC
MCO-18ACL
MCO-20AIC
MCO-20AICL
MCO-230AIC Series
MCO-230AICL Series
Bracket plate
Double stacking bracket
MCO-170PS
Stacking plate MCO-170SB Stacking plate MCO-230SB