Panasonic MCO-170M Series - Specifications

99
SPECIFICATIONS
Product name
O
2
/CO
2
Incubator
MCO-170M
O
2
/CO
2
Incubator
MCO-170MUV
O
2
/CO
2
Incubator
MCO-170MUVH
External dimensions W620 mm x D710 mm x H905 mm
Internal dimensions W490 mm x D523 mm x H665 mm
Interior volume
161 L
Exterior
Painted steel (Rear cover has no paint)
Interior
Stainless steel containing copper
Outer door Painted steel
Inner door Stainless steel with gasket
Gastight split door 4 doors made of tempered glass
Trays
3 trays made of stainless steel containing copper
W470 mm x D450 mm x H12 mm
Maximum load: 7 k
g
/tray
Access port
Inner diameter: 30 mm, On the back side
Insulation
Expandable polystyrene beads
Heating system
DHA system (heater jacket + air jacket system)
Heater
285 W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
CO
2
controller PID control system
CO
2
density display Digital display
O
2
controller PID control system
O
2
density display Digital display
Air circulation Fan assisted
Air filter 0.3 m, Efficiency: 99.97 % or higher
UV lamp
----- 4 W x 1 (ozone-free emission)
Alarms
Automatic set temperature alarm, Automatic set CO
2
density alarm,
Automatic set O
2
density alarm, High limit temperature alarm,
CO
2
gas, various sensor/heater alarms
Remote alarm contacts Allowable contact capacity: DC 30 V, 2 A
CO
2
inlet connection 4 mm to 6 mm diameter tube can be connected
CO
2
inlet pressure
0.1 MPa(G) (1 kgf/cm
2
(G), 14.5 psi(G))
O
2
inlet connection 4 mm to 6 mm diameter tube can be connected
O
2
inlet pressure
0.1 MPa(G) (1 kgf/cm
2
(G), 14.5 psi(G))
Weight
77 k
g
79 k
g
Accessories
----- 2 unlock key
1 removable power supply cord, power supply cord cover plate, 3 trays,
3 gas tube, 1 humidifying pan, 6 tube bands