56
OPERATION/ALARM LOG
Note: When the specified operation log data
doesn't exist, Notice dialog box is displayed. Press
OK key, and then re-specified according to
procedure 4 and 5.
7. When the export is complete, Information dialog
box is displayed. Press OK key.
Note: Even after the export of operation log data is
complete, operation log data saved in the incubator
are not deleted.
8. Remove the USB memory from the USB port.
Note:
・The log folder is created in the USB memory, and the exported file is saved in it in CSV format. The
exported file name is in date (8 digits) - type of data format.
(e.g.) When exporting all types of data using All (from Oct. 1st, 2015 to Jan. 1st, 2016):
20151001-20160101_AllCh.csv
20151001-20160101_Door.csv
(e.g.) When exporting Actual Temp. using 1 Day (Jan. 1st, 2016):
20160101_Temp.csv
・On the beginning of the exported file, “MCO-170M” is written. However when the Unique ID is registered
(refer to page 49～50), “MCO-170M” and Unique ID (8-digit) are written.
(e.g.) When “RoomA001” is set as the Unique ID of MCO-170MUV:
MCO-170M, RoomA001
9. Press Top key to return to the Top screen.
To Next Page
Loading...
