To Next PageTo Next Page
Need help?Do you have a question about the Panasonic MEDLN83BL and is the answer not in the manual?
General| Model | MEDLN83BL |
|---|---|
| Category | Servo Drives |
| Manufacturer | Panasonic |
| Rated Output Power | 750W |
| Output Power | 750W |
| Protection Functions | Overvoltage, Undervoltage, Overheat |
| Communication Interface | RS-485 |
| Ambient Operating Temperature | 0 to +55 °C |
| Storage Temperature | -20°C to 80°C |
| Vibration Resistance | 5.9 m/s² |
| Input Voltage | 200 to 240 V AC |
Details specifications for the standard type servo drives.
Details specifications for the multi-function type servo drives.
Explains power input, output, and regenerative resistor connections.
Describes the USB interface for computer connection and its functions.
Details EtherCAT connectors for motion control communication.
Explains the connector for functional safety features.
Details the parallel input/output connector for control signals.
Describes the connector for feedback scale signals.
Explains the connector for CS signal interface.
Details the connector for analog monitor outputs.
Illustrates the electrical interface for input and output signals.
Specifies wire types and maximum allowable cable lengths for connections.
Lists part numbers and manufacturers for external connectors.
Provides crucial safety and connection instructions for power connectors.
Details specific wiring guidelines for the parallel I/O connector (X4).
Explains wiring for feedback scale and CS signal connectors.
Details wiring procedures for EtherCAT connectors.
Explains the function and usage of the dynamic brake system.
Specifies mounting orientation and clearance requirements for optimal cooling.
Details EMC, Low Voltage, and Machinery directive standards.
Outlines compliance with European Union directives.
Covers installation environment, power supply, protection, filters, and grounding.
Recommends peripheral devices like circuit breakers, noise filters, and surge absorbers.
Details requirements for UL certification and installation.
Notes precautions related to radio wave emissions in South Korea.
Explains requirements for voltage drop in semiconductor manufacturing equipment.
Provides guidelines for reducing harmonic distortion.
Covers DANGER/CAUTION symbols and fundamental safety rules.
Provides detailed instructions for safe electrical wiring and handling.
Outlines precautions for operation, environment, and maintenance.
Defines the criteria for servo driver end-of-life based on capacitor degradation.
Estimates replacement intervals for in-rush current relays and cooling fans.
Specifies the duration and conditions for the warranty period.
Defines what is covered and excluded under the warranty.
Outlines the steps for obtaining warranty service.
