Panasonic MFDLNB3SE - User Manual

REFERENCE SPECIFICATIONS
MODEL
Product Name: AC servo driver
Part Number : MINAS-A6 series (Basic type)
Issued on Sept. 1, 2015
Revised on Sept. 14, 2016
Motor Business Unit, Electromechanical Control Business Division
Automotive & Industrial Systems Company, Panasonic Corporation
7-1-1 Morofuku , Daito-City, Osaka 574-0044 Japan
No.SX-DSV03015

Summary

Model Designation Code

Product Line-up

General Specifications

General Specification

Details general specifications for the servo driver, including power, conditions, and signals.

Specifications by Model

Appearance and Part Names

Configuration of Connectors and Terminal Blocks

Power Connector XA, XB, XC, XD and Terminal Block

Details configuration and pin assignments for power connectors and terminal blocks.

USB Connector X1

Parallel I;O Connector, X4

Explains parallel I/O connector pin assignments and functions for digital I/Os.

Encoder Connector X6

Dimensions

Wiring

Used Cables and Maximum Cable Lengths

Precautions for Wiring

Provides important safety and installation guidelines for wiring the servo driver and related components.

Compliance with Global Standards

Peripheral Device Configuration

Details recommended peripheral devices and installation environment for system configuration.

List of Peripheral Devices Applicable to Servo Driver

Provides a list of compatible peripheral devices like contactors, filters, and absorbers.

Compliance with UL Standard

Safety Precautions

Life and Warranty

Life Expectancy of the Driver

Warranty Period

Specification for Each Model

Panasonic MFDLNB3SE Specifications

General

Communication Interface	RS-485
Humidity	90 %RH or less (non-condensing)
Input Voltage	200 V AC to 240 V AC
Output Current	3.0 A
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating
Communication	MECHATROLINK-II
Operating Temperature	0 °C to +55 °C