EasyManua.ls Logo

Panasonic NA-140ZS1

Panasonic NA-140ZS1
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Optional Functions
Changing Programme Settings
You can change the washing
temperature according to the type of
laundry or the degree of soiling.
After selecting a programme, you can
reset the temperature and the
programme end time.
Preparing
Sort the laundry and put it into the
drum. (P.9)
Add the detergent. (P.12)
1
Turn on the power.
2
Select a programme.
(P.18, 19)
3 and 4
Use the procedures on the
right to change the settings.
The setting range depends
on the programme.
(P.20, 21)
The display returns to the
previous display after about
7 seconds if no selections are
made.
5
Start operation.
Cotton
40
1400
232
:
Changing the temperature
r °C
3
Press.
The setting display appears.
4
Select the water
temperature and
set.
Example when 40 °C is set
Setting range
C (Cold) - 90 °C (9 levels)
Setting guide
Higher temperature:
Whites, cottons, heavily soiled
items
Lower temperature:
Colours, items that shrink
easily, lightly soiled items
40
50
30
Temperature
25
Optional Functions
Change the spin speed to dry laundry
more thoroughly or reduce wrinkles in
laundry.
NOTE
You can change the spin speed
after the programme starts and until
the wash process ends. Pause the
programme and do the steps 3, 4,
and 5.
You can set the time the programme
will end.
To check a preset time
To cancel settings
NOTE
Do not use a detergent that is
difficult to dissolve because it may
cake up before the wash starts and
not flow into the drum.
You cannot set the end time for the
“Wool” programme.
Changing the spin speed
M r/min
3
Press.
The setting display appears.
4
Select the spin
speed and set.
Example when 1200 r/min is set
Setting range
NA-140ZS1
400 - 1400 r/min (8 levels)
NA-168ZS1
400 - 1600 r/min (9 levels)
Setting guide
Higher speed:
To dry more thoroughly
Lower speed:
To reduce wrinkling
1200
1400
1000
r
/
min
Setting the programme end time
I
Time
3
Press.
The setting display appears.
4
Select the time
and set.
Example when after about 3
hours is set
Setting range
Up to 24 hours (in increments of 1
hour)
Press.
Turn off the power.
(All settings are cancelled)
3
4
2
End time
h

Related product manuals