14
Washing
Washing
Basic Method
NOTE
● Do not get laundry caught in the
door.
It can cause damage to the door
seal.
● Do not put too much laundry into
the drum.
It can cause excessive vibration or
damage to the appliance.
■To open the door during operation
(The door is locked during operation)
● During spinning process, it may take
about 1 minute for the drum to stop
rotating.
Cotton
40
1400
232
:
Changing settings Using optional functions
3
Press “Pause”.
(The lock is released with
a click)
15
Washing
■Preparing
● Sort the laundry and put it into the
drum. (P.9)
● Add the detergent. (P.12)
NOTE
● Colours can run between clothes,
so remove coloured laundry soon
after the programme finishes.
NOTE
● The range of settings you can
change and the optional functions
you can add vary depending on the
programme.
(P.20, 21)
1
Turn on the power.
2
Select a programme.
(P.18, 19)
The required time is displayed.
■Changing settings
■Using optional functions
3
Start operation.
● Weighing (about 30 seconds)
● Capacity display (about 5
seconds)
● Required time display
(recalculated)
Operation finishes.
(The buzzer sounds and the door
lock is released.)
Assessing Wash Load
Some programmes do not
weigh the laundry. (P.18, 19)
Wash Capacity
0% 50% 100%
(e.g.)
(e.g.)
Spin speed (P.25)
After selecting a programme, you
can change the following settings.
Timer (P.25)
Temperature (P.24)
Changing settings
Using optional functions
Speed/Eco (P.26)
Easy Iron (P.27)
Stain Master (P.29)
Extra Rinse (P.28)
Prewash (P.29)
Mode (P.27)
After selecting a programme, you
can add the following optional
functions.
Select and run the wash, rinse
To Next Page
Loading...
