- 12 -
How to Operate
NOTE: • Program the remaining Memory Pads as desired by repeating steps 1-5. You may insert up to 10 memory Programs.
• When the PROG. indicator is blinking, the program can be cancelled and/or the Pad erased by pressing the STOP/
RESET Pad.
B. Programming Memory Pads for 2 or 3 Stage Heating:
Example: To program for 2 minutes at DEFROST for 2 stage heating using Memory Pad Number 5
Display Window
1. Complete Steps 1 to 4 on page 11.
2.
• Press the POWER Level Selector Pad 5
times. DEF indicator light will light.
3. • Press the Memory Pads 2, 0 and 0.
4.
• Press the PROG. Pad again.
You have completed programming the
Selected Memory Pad for 2 stage heating
and double heating time for multiple portion
heating automatically.
• 2 seconds later, the Display Window will
show your setting program as step 5 on
page 11.
• After all of your programming has been
completed, the Display Window will go blank.
NOTE: • Program the remaining pads as desired by repeating the steps above.
DO NOT OPEN THE OVEN DOOR during programming.
• For a 3 stage heating cycle, select a further power level and set the desired heating time between steps 3 and 4 above.
IP5102_3BS80RP_Eng_10_150121.indd 12IP5102_3BS80RP_Eng_10_150121.indd 12 2015-1-21 10:00:342015-1-21 10:00:34
To Next Page
Loading...
