30
Quick 30 feature
This feature allows you to set cooking time in 30 seconds increments up to
5 minutes at 900 W (High) MICROWAVE power.
It is only available for MICROWAVE.
Press Quick 30 to set the
desired cooking time.
Time appears in the display.
Press Start/Set.
The time counts down in the
display.
Notes
1. After the operation is nished, “Add” is displayed for about 1 minute on the
display. While displaying, you can use ADD TIME feature, refer to below.
2. If desired, you can use other power levels. Select the desired power level
before pressing Quick 30.
This feature allows you to add cooking time during and at the end of cooking.
It is available for MICROWAVE, GRILL, CONVECTION and COMBINATION
cooking.
Example: To add 5 minutes at the end of cooking.
Press Add Time
right after
cooking.
Set the additional time. Press Start/Set.
The time counts
down in the
display.
Press 5 times.
Notes
1. After the operation is nished, “Add” is displayed for about 1 minute on the
display. While displaying, you can use ADD TIME feature again.
2. During cooking, set the additional cooking time (1 to 10 minutes) after pressing
Add Time. Time will be added without pressing Start.
3. After cooking, ADD TIME can be set up to 30 minutes for High MICROWAVE
power or 99 minutes 50 seconds for other cooking modes. It will be cancelled,
if you do not perform any operation for 1 minute after cooking.
4. ADD TIME feature can be used after MULTI-STAGE COOKING. The power
level is the same as the last stage. This function will not operate if the last
stage was standing time.
5. ADD TIME feature is not available for AUTO PROGRAMMES.
Add time feature
NN-CT65MB.indb 30 2021/06/23 10:40:56
To Next Page
Loading...
