- Eng-20 -
English
Note
The above illustration is for reference only.
Parts of Your Oven (continued)
Re-position the drip tray by
clicking back onto the legs.
Front View
1. Control panel
2. Drip tray
3. Water tank
4. Air vent exhaust
5. Warning label (Some areas
may have two warning
labels at the back of oven.)
6. Identification label
1
2
3
Rear View
54
6
Drip Tray
1. Before using the oven, the drip tray
must be fitted as it collects excess water
during cooking. The drip tray should
be removed and cleaned on a regular
basis.
2. Fit the drip tray by holding with both
hands and clicking onto the front legs of
the oven.
3. To remove the drip tray, hold with both
hands and gently ease forward. Wash
in warm soapy water. Re-position the
drip tray by clicking back onto the legs.
4. Do not use a dishwasher to clean the
drip tray.
Water Tank
Carefully remove the water tank from the oven. Remove the lid and fill with soft
water such as distilled water. (Do not use hard water such as mineral water).
Replace the lid and position back in the oven. Ensure the lid is closed tightly and
securely positioned, otherwise leakage may occur. It is recommended to clean the
water tank in warm water once a week. See page 32 for reference
F0003CM40HP_Eng.indd 20F0003CM40HP_Eng.indd 20 2022/9/21 14:02:172022/9/21 14:02:17
To Next Page
Loading...
