- Eng-52 -
English
Cleaning Setting
F1. Drain Water
Water is pumped through the system to clean the pipes. The water is drained into the drip tray.
Press the Dial to
confirm the selection.
Press the Dial to start.
Add 100 g of water to
the water tank. Ensure
drip tray is empty.
Tap Cleaning
pad once.
Turn the Dial to select
F1. Drain Water.
Note:
1. Only run this program with 100 g of water in the tank.
2. Do not remove the drip tray during the drain water program.
3. Empty the drip tray and rinse with running water after the program has finished.
Caution:
If the drain water program is used directly after a steam cooking program, hot water may be drained into the drip
tray.
F0003CM40HP_Eng.indd 52F0003CM40HP_Eng.indd 52 2022/9/21 14:02:252022/9/21 14:02:25
To Next Page
Loading...
