Panasonic NN­GS595A - 3.5 Avoid Inserting Foreign Objects; 3.6 Post-Repair Confirmation Checks; 3.7 Sharp Edges Caution

10/24/2016 XMLServiceManual
file:///C:/Users/sh.dehghani/Desktop/NNGS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NNGS595A/SVC/PHAMOS0511035C3/inde…
3/3
3.Whenreplacingfaultyswitches,besurethemountingtabsarenotbent,brokenordeficientintheirabilitytoholdthe
switches.
3.5Avoidinsertingnails,wireetc.throughanyholesin
theunitduringoperation
Neverinsertawire,nailoranyothermetalobjectthroughthelampholesonthecavityoranyholesorgaps,becausesuchobjects
mayworkasanantennaandcausemicrowaveleakage.
3.6Confirmafterrepair
1.Afterrepairorreplacementofparts,makesurethatthescrewsoftheoven,etc.areneitherloosenormissing.
Microwavemightleakifscrewsarenotproperlytightened.
2.Makesurethatallelectricalconnectionsaretightbeforeinsertingtheplugintothewalloutlet.
3.Checkformicrowaveenergyleakage.(Refertoprocedureformeasuringmicrowaveenergyleakage).
CAUTIONMICROWAVERADIATION
USECAUTIONNOTTOBECOMEEXPOSEDTORADIATIONFROMTHEMICROWAVEMAGNETRONOROTHERPARTS
CONDUCTINGMICROWAVEENERGY.
IMPORTANTNOTICE
Thefollowingcomponentshavepotentialsabove2000Vwhiletheapplianceisoperated.
Magnetron
Highvoltagetransformer(Locatedoninverter(U))
Highvoltagediodes(Locatedoninverter(U))
Highvoltagecapacitors(Locatedoninverter(U))
Payspecialattentiontotheseareas.
Whentheapplianceisoperatedwiththedoorhingesormagnetroninstalledincorrectly,themicrowaveleakagecanexceedmore
than5mW/cm2.Afterrepairorexchange,itisveryimportanttocheckifthemagnetronandthedoorhingesarecorrectlyinstalled.
3.7Sharpedges
Caution
Pleaseusecautionwhenunpacking,installingormovingtheunit,assomeexposededgesmaybesharptothetouchandcause
injuryifnothandledwithcare.