Panasonic NN­GS595A - 4 DISASSEMBLY AND PARTS REPLACEMENT PROCEDURE; 4.1 Magnetron Replacement Procedure

10/24/2016 XMLServiceManual
file:///C:/Users/sh.dehghani/Desktop/NNGS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NNGS595A/SVC/PHAMOS0511035C3/inde…
1/9
4DISASSEMBLYANDPARTS
REPLACEMENTPROCEDURE
4.1Magnetron
1.Dischargethehighvoltagecapacitor.
2.Remove2screwsholdingreinforcebracketAonovencavity.
3.Remove2screwsholdingreinforcebracketBonovencavity.
4.Remove1screwholdingoventhermistoroncavitytopplate.
5.Remove1groundingscrewholdingACcordʼsearthlead.
6.Disconnect2highvoltageleadwiresfrommagnetronfilamentterminals.
7.Remove1screwholdingthermistoronmagnetron.
8.Remove1screwholdingairguideAonmagnetron,thenremoveairguideA.
9.Remove2screwsholdingairguideBonmagnetron&onbaseplaterespectively,thenremoveairguideB.
10.Disconnect2leadwiresfromfanmotorterminals.
11.Disconnectleadwiresfromfuseholderterminals.