Panasonic NN­GS595A - 4.7 IR Sensor Replacement; 4.8 Door Assembly Replacement

10/24/2016 XMLServiceManual
file:///C:/Users/sh.dehghani/Desktop/NNGS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NNGS595A/SVC/PHAMOS0511035C3/inde…
5/9
4.7IRSENSOR
1.DisconnectconnectorCN5fromD.P.C.boardAU.
2.Remove1screwholdingIRSENSOR(U)onrightheaterpanel.
ToreplaceswingmotorofIRsensor
1.Releasethelockingleverofconnectoronswingmotor,thenremovedriveline.
2.Remove2screwsholdingswingmotoronmotormountingplate.
3.RemoveswingmotorfromIRsensorassy.
4.8Doorassembly
1.Removeleftandrightdoorkeyspringsfromdoorarmwithplier.
NOTE:
Pleasesupportdoorbeforeoperation.