22
5.11. Each Function Display (details)
5.11.1. Inverter rotation frequency display
1. Display when switching from OFF ON
From the conditions up to the intended rotation frequency, indicate one stage at a time but without display.
For example, in the case of OFF ON (R4)
2. Display when switching from ON OFF
Indicate one stage at a time from the current status of rotation frequency until there is no display.
For example, in the case of ON (R4) OFF
3. An upwards shift in display when ON
For a rotation frequency shifting upwards, after flashing 5 times on the 6th occasion the display lights up.
For example, in the case of a upwards shift from R3 R4
5.11.2. Temperature setting
• From the displayed standby status, by pushing the setting switch-over button ( ), the target display can be switched-over from
the interior temperature of the refrigerator display to the temperature setting display.
When in the temperature setting display, the displayed temperature flashes. (0.5sON/0.5sOFF)
- Refrigerator settings
To Next Page
Loading...
