59
2. Remove Filter on the COVER LED AG.
3. Remove the PAS-C28VD2 (DEO).
a. Remove the fixation screw on the COVER LED AG
to remove the COVER LED AG.
b. Disconnect the PAS-C28VD2 (DEO) connector and
release the PAS-C28VD2 (DEO) from the 2 hooks
inside the COVER LED AG.
NOTES
• Be careful not to break PAS-C28VD2 (DEO) when remov-
ing and installing.
11.7. Disassembly of VC (Vegetable
Compartment)
11.7.1. Filter AS., PAS-C29FGS (VC)
1. Lift to remove the COVER FILTER AS.
2. Twist the FILTER AS to the left to unlock and remove
it.
3. Unscrew 2 screws on the COVER PLATE FILTER AS.
4. Pull the COVER PLATE FILTER AS slightly out.
5. Lift the COVER PLATE FILTER AS Lid to remove.
6. Release PAS-C29FGS (VC) from 2 hooks.
7. Disconnect the PAS-C29FGS (VC) from its connector.
NOTES
• Be careful not to break PAS-C29FGS (VC) when remov-
ing and installing.