55
11.4.2. DEFROST SENSOR
1. Cut the cable tie that is fastening the Defrost Sensor.
2. Cut the wire near to the Defrost Sensor.
11.4.3. DEFROST SENSOR
11.5. Disassembly of BUCKET ICE
AS. & HOLDER CONTROL
DIS’AS.
11.5.1. BUCKET ICE AS. & ICE MAKER
A’SSY
1. Remove BUCKET ICE AS.
a. Remove a screw to remove the COVER DUCT ICE.
b. Lift the ICE BIN, tilt the bottom of the BUCKET ICE
AS. towards you and remove it.
2. Remove 4 screws on the ice maker a’ssy and detach
it from its place (but you cannot remove it now).
Figure of after COVER DUCT ICE and BUCKET ICE
AS. removed.
To Next Page
Loading...
