- Eng-20 -
English
One Push Setting
One push setting can simplify operation. You can set desired function as one push setting that can use easily in
each time.
To Save:
➊
“ ´ZLOOÀDVKLQWKHGLVSOD\ZLQGRZ
DIWHU¿QLVKLQJ,WPHDQV\RXFDQVDYH
program as one push setting.
➋
“ ´ZLOOVWRSÀDVKLQWKH
display window when press
button 2 seconds. Program has
saved successfully.
To set:
➊
Press Start/Set button and saved
program appears in the display
window.
Example: Saved
“Steam-Low” for 3
minutes
➋
Press Start button to cooking.
To cancel:
➊
Press Start/Set button and saved
program appears in the display
window.
Example: Cancel
saved “Steam-Low”
for 3 minutes
➋
Press the button 2 seconds and
cancel one push setting.
Notes:
1. “
´ZLOOÀDVKLQWKHGLVSOD\ZLQGRZDIWHU¿QLVKLQJ3UHVV6WRS5HVHWEXWWRQLI\RXGRQRWVDYH
program as one push setting.
2. If one push setting is saved, “
´ZLOOÀDVKLQWKHGLVSOD\ZLQGRZ
3. Only one program can be set to one push setting. Previously one push program will be covered when
a new program is saved.
2QHSXVKSURJUDPZLOOUHPDLQLISRZHUHGRႇ
5. One push setting are used for all functions. (only except Steam Shot)