3. Cut Washers (Ref No. 473, 475, and 477) are not reusable. If
removed, install a new one.
4. Lamp (Ref No. 283) replacement note: / DANGER: Use only
replacement Lamp (PART NO. LSLL0028) supplied by Panasonic
to reduce risk of fire. Handle new Lamp with cloth or tissue as
skin oils decrease Lamp life. Remove Light Protector and allow
Lamp to cool before replacing to avoid possible burn hazard.
5. DEW Sensor (Ref. No. 236) and DEW Cables (Ref. No. 286)
replacement note:
The DEW Sensor (Ref. No. 236) or DEW Cables (Ref. No. 286) is
supplied separately as replacement parts. When replacing the
DEW Sensor in early products, be sure to replace both the DEW
Sensor and the DEW Cables. Refer to "DEW Sensor, DEW Cable"
of MECHANISM SECTION in DISASSEMBLY/ASSEMBLY
PROCEDURES.
6. Mechanism Chassis Ass'y (Ref. No. 1) replacement note:
When replacing the Mechanism Chassis Ass'y, be sure to perform
the Envelope Output Adjustment. Refer to "ENVELOPE OUTPUT
ADJUSTMENT" in MECHANICAL ADJUSTMENT.
13.2. MECHANICAL REPLACEMENT PARTS LIST
MECHANICAL REPLACEMENT PARTS
77
To Next Page
Loading...
