49
ª
Digital Effect Functions
It is as follows when [GAINUP] is selected.
≥Manual Focus Mode
≥The shutter speed and White Balance cannot be operated.
≥The Sports Mode [5] and the Portrait Mode [7] are
cancelled.
≥It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or
[TRACER] of [EFFECT1] together with the digital modes of
[EFFECT2] on the [DIGITAL EFFECT] Sub-Menu.
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible.
(
l
22)
≥When [PROGRESSIVE] on the [CAMERA SETUP]
Sub-Menu is set to [ON], the digital modes of [EFFECT1]
on the [DIGITAL EFFECT] Sub-Menu cannot be used.
(
l
47)
In the following cases, using the [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu is not possible.
≥When [PROGRESSIVE] is set to [ON]
In the following cases, using the Digital Effect Function
is not possible.
≥Card Mode
Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
Picture-in-Picture
≥If the Movie Camera is turned off, the smaller picture
disappears.
≥Titles cannot be inserted into the smaller picture.
Multi-Picture Mode
≥If the [MULTI] Button is pressed while self-recording Mirror
mode
(
l
25)
is used, the still picture is displayed from the
upper right corner of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
≥Multi Picture mode cannot be used in digital still picture
mode.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be cut off
slightly.
ª
Playing Back
Repeat Playback
If you continue to push the Operation Lever towards [1] for 5
seconds or longer, the Movie Camera switches to Repeat
Playback Mode, and the [R !] Indication appears. (To
cancel Repeat Playback Mode, set the [OFF/ON/MODE]
Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the playback
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu
to [OUT/PHONES] and connect the headphones to the
[PHONES] Socket
(
l
7)
on the Movie Camera. In this case,
no sound (including a warning sound and shutter sound) will
not be reproduced through the built-in speaker of the Movie
Camera.
Choosing Sound during Playback
(NV-MX8 only)
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and sub sound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If an attempt was made to perform audio dubbing for what
was recorded with [12bit] selected as the [AUDIO REC]
setting, the sound played back will be set to stereo
regardless of the [AUDIO OUT] setting if [12bit AUDIO] is
set to [MIX].
ª
Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than
1 minute.
ª
Playback Digital Effect Functions
≥Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal
(
l
33)
or
Digital Still Picture Terminal
(
l
34)
.
≥You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape.
ª
Multi-Picture Mode (VCR Mode)
≥The quality of Multi images deteriorates slightly.
≥Playback Multi-Mode screens cannot be output through the
DV Terminal
(
l
34)
or Digital Still Picture Terminal
(
l
33)
.
≥If there is input from DV Terminal, a multi screen cannot be
created.
≥When signals are input from S-Video Input/Output Socket
or Audio-Video Input/Output Socket, a Multi Screen cannot
be re-displayed.
≥Signals input from S-Video Input/Output Socket or Audio-
Video Input/Output Socket cannot be displayed on a Multi
Screen.
≥If you switch the Movie Camera from the Index Multi-
Picture Mode over to the Camera Mode, the setting of
[SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of
the [CAMERA FUNCTIONS] Main-Menu is automatically
set to [STROBE].
ª
Playback Zoom Function
≥You cannot adjust the sound volume with the Remote
Controller in Playback Zoom Mode.
≥If you turn off the Movie Camera power or if you switch
from VCR Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal
(
l
33)
or Digital Still
Picture Terminal
(
l
34)
are not enlarged.
≥As you enlarge an image, the quality of image suffers.
≥During the Playback Zoom Function, the Variable Speed
Search Function cannot be used with the Remote
Controller.
ª
Playing Back on Your TV
≥If you set [AV JACK] on the [AV IN/OUT SETUP]
Sub-Menu to [IN/OUT] with NV-MX8, nothing will be shown
on the TV screen except during playback.
B.book49ページ２００１年８月２７日 月曜日 午前１０時１４分
To Next Page
Loading...
