EasyManua.ls Logo

Panasonic NV-MX2 - Digital Effect Functions; Digital Effects 1 and 2 Categories; Wipe and Mix Mode Effects

Panasonic NV-MX2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Digital Effect Functions
This Movie Camera is equipped with Digital Effect Functions that add special
effects to the scene.
Digital Effects 1 [EFFECT1]
1) Multi Mode [MULTI]
2) Picture-In-Picture Mode [P-IN-P]
3) Wipe Mode [WIPE]
4) Mix Mode [MIX]
5) Strobe Mode [STROBE]
It records images with a stroboscopic effect.
6) Gain-up Mode [GAINUP]
It brightens images electronically.
Adjust focus manually when using this mode.
(
l
23)
7) Trailing Effect Mode [TRACER]
It records images with a trailing effect.
8) Mosaic Mode [MOSAIC]
It produces a mosaic-like image.
9) Mirror Mode [MIRROR]
The right half of an image becomes a mirror image of the left half.
Digital Effects 2 [EFFECT2]
10) Negative Mode [NEGA]
The colours of the recorded image are inverted as seen in a negative.
11) Sepia Mode [SEPIA]
It records a scene with a brownish tint, like the colour of old pictures.
12) Black&White Mode [B/W]
It records an image in black and white.
13) Solarisation Mode [SOLARI]
It records an image with a painting-like effect.
To Select a Desired Digital Effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or
[EFFECT2] >> a desired Digital Effect.
To Cancel the Digital Effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or
[EFFECT2] >> [OFF].
If the Movie Camera is turned off, the [EFFECT2] settings are cancelled.
For other notes concerning this item, see page 49.
ª
Wipe Mode and Mix Mode
Wipe Mode:
Like a curtain is being pulled, the still picture of the last recorded scene
gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image of the last
recorded scene gradually fades out.
1
Set [DIGITAL EFFECT] >> [EFFECT1] >> [WIPE] or [MIX].
The [WIPE] or [MIX] Indication appears.
2
Press the Recording Start/Stop Button to start recording.
3
Press the Recording Start/Stop Button to pause the
recording.
The last scene is stored in memory. The [WIPE] or [MIX] Indication
changes to [B] or [C].
4
Press the Recording Start/Stop Button to restart the
recording.
The last image of the previous scene gradually changes to the new
scene.
For other notes concerning this item, see page 49.
3) WIPE 4) MIX
5) STROBE
6) GAINUP 7) TRACER
8) MOSAIC
9) MIRROR
10) NEGA
11) SEPIA
12) B/W
13) SOLARI
[EFFECT 1]
[EFFECT 2]
1) MULTI
2) P-IN-P
WIPE
MIX
WIPE
WIPE
MIX
MIX
1
2,3,4
PUSH
W.B/SHUTTER/IRIS/
VOL/JOG
MENU
1
B.book25ページ2001年8月27日 月曜日 午前10時14

Table of Contents

Related product manuals