Writing Printing Data on a Card
(DPOF Setting)
DPOF Setting Printing data (DPOF Settings), such as the number of images to be
printed, can be written to the Card. “DPOF” means Digital Print Order Format.
1
Set the [PICTURE/MPEG4/VOICE] Selector to [PICTURE].
2
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[DPOF SETTING] >> [YES] >> [VARIABLE] .
≥To print all pictures one at a time, select [ALL 1]. When all images are
not printed, select [ALL 0].
3
Select a desired picture.
≥The number of prints set by DPOF
1
is displayed.
≥The selected picture is marked with a frame.
4
Turn the [PUSH] Dial and select the number of pictures to be
printed, and press the [PUSH] Dial.
≥The [¥] indication
2
is displayed in the picture set.
≥When printing one each of all the pictures, select [ALL 1]; if not all the
pictures are printed, select [ALL 0].
5
Repeat Step 2 to 4 and press the [MENU] Button when the
setup is completed.
To Verify DPOF Setting
Select [VERIFY] in Step 2 above. The pictures for which 1 or more print is set
in DPOF are played back continuously.
≥For other notes concerning this item, see page 50.
DPOF SETTING
(PRINT QUANTITY)
PRESS MENU TO EXIT
2
1
PUSH
MENU
W.B/SHUTTER/IRIS/
VOL/JOG
To Next Page
Loading...
