Important for Program Index Search:
Timer recordings must be
recorded back to back in order for
them to be placed on the Program
Index list. If a timer recording is
followed by a function, such as
REW or PLAY, the data is lost.
STOP/EJECT d
REWIND FAST FORWARD
C C
Program Index Search
(For timer recordings only)
This feature allows you to choose a timer recorded program from a
Program Index list and then start a search for that program.
Once the tape is ejected or normal recording is started, all program
Index data are deleted.
1 Press INDEX to display the "SELECT
SEARCH MODE" screen.
2 Press &Y to select =PROGRAM
INDEX SEARCH," and then press •
to display the =PROGRAM INDEX"
screen.
SELECT SEARCH MOOE
PROGRAM INDEX
DArE START CATEGORY CH
11 4 12:30P MOVIE NSC
11 4 8:OOP COMEDY CBC
11 7 3:00P MUSIC NSC
SELECT:& • KEY
SEARCH :_ KEY
F.NO : INOEX KEY
3
Press ,&_' to select the desired
recorded
program, and then
press • to start the forward or
rewind search.
• When the designated program is reached,
the VCR automatically goes into Playback
mode.
F FoI
INOEX SEARCH
C
FAST
FORWARD
C
Index Scan
(For normal and/or timer recordings)
This feature allows you to scan (forward or reverse
each recording for 10 seconds in Playback mode.
a Press INDEX to display the
"SELECT SEARCH MODE" screen.
• This screen appears only ifthere are timer
recordingson the Program Index list. If this
screen does notappear, go to step c.
SELECT SEARCH MOOE
PROGRAM INDEX SEARCH
SELECT: • • KEY
SET :_ KEY
END : INOEX KEY
bPress &_' to select =INDEX
SEARCH," and then press •
to display the =INDEX" screen.
C Press REW or FF to begin the scan.
• As each index mark is reached,
a short playback will be performed
after which FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
INOEX
FF
AUTO INOEX SEARCH
1
_STOP
Start here
Play (for about 10 seconds) i
....--Fast.Fo_..-._or.R_._--.'p_a_.......j
25
To Next Page
Loading...
