Panasonic Omnivision PV-9401 - Tape Operation Oo; VHS Index Search System

ape Operation
VHS Index Search System
Each time recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program
index and information are also included. These index marks can be used to access or scan recordings.
Direct Access (For normal and /or timer recordings)
Go directly to desired recording.
1 Cr
Display SELECT SEARCH
MODE.
Press INDEX.”
* if there are no timer recordings on the
Program Index List, go to step 3.
Display INDEX.
1) Press AY to select.
2) Press to display.
e This screen appears only if
there are timer recordings.
SELECT SEARCH MODE
INDEX SEARCH
PROGRAM INDEX SEARCH
SELECT:4 ¥ KEY
SET :> KEY
END : INDEX KEY
Select the recording number.
INDEX
3 OOO Press NUMBERED
OOGO keys.
O Oj * To calculate number,
© see below.
Start search.
Press FF or REW.,
+ When search is
finished, playback
begins.
INDEX SEARCH 04
E To Calculate Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2,
enter 3 in step “3” and press REW.
a a a
pa | 2 fa tats} 6 |?
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step “3" and press FF.
> ON a a
pp A |7]
NOTE: # indicates start points of each recording.
4 REW
SELECT/
NUMBERED
keys
1 INDEX
Model PV-9451 remote is shown here.
* Make each entry within 10 seconds, or
the Index Search mode will be canceled.
¢ If Direct Access or Index Scan is started
very close to an index mark, that index
mark may not be counted in the search.
20 For assistance, call 1-800-211-PANA(7262).