Panasonic Omnivision PV-9401 User Manual

: O
“TAPE POSITION, or ADD/DLT button does not work when pe ced press the VCR button on the
remote and try the button again.
When set to proper audio mode VCR can:
1) record/playback MTS stereo broadcasts (main language) in Hi-Fi stereo.
2) record/playback mono (main language) or SAP (sub language) broadcasts.
3) playback non Hi-Fi tapes in monaural.
+ The selected broadcast sound is always recorded on left and right Hi-Fi track as well as the normal monaural
track. This means tapes can be played back on Hi-Fi and non-Hi-Fi VCRs.
Audio Mode for Recording
Display audio mode.
Press SAP/ Hi-Fi.
SAP/Hi-Fi
Select desired mode.
Press SAP/ Hi-Fi
SAPH.-Fi | repeatedly (each
press within 5
seconds).
+ Refer to the “Receivable
‘THe RoW nacas Broadcast Types” on page 24.
your selection.
Do a recording.
See page 9.
Audio Mode for Playback
Start playback.
See page 8.
Display audio mode.
Press SAP/ Hi-Fi.
SAP/Hi-Fi
Select desired mode.
Press SAP/ Hi-Fi
SAPIHi-Fi repeatedly (each >
press within 5
seconds).
HIFI (L/R) 4
HIF? (L)
HIFI (R)
NORMAL
* Select “HIFI(L/R}" or "HIFI(L)” or .
SR “HIFI(R)” to listen to stereo
e
The
ae
een
recordings
in
stereo
sound.
E
your
selection.
Select
“NORMAL”
for
monaural
sound.
Only tapes recorded in Hi-Fi stereo
wilt play back with true stereo sound.
Standard stereo tapes will play back
in monaural sound.
To listen to Hi-Fi stereo playback, the
VCR AUDIO (L/R) jacks must be
connected to a stereo TV or an
external stereo amp and speakers.
(See page 24.)
{f tracking is adjusted during playback,
Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio playback
volume level may differ.
25
u3]SÁS 091918 IJ-IH SHAASEOpedg SLW

Panasonic Omnivision PV-9401 Specifications

General

Brand	Panasonic
Model	Omnivision PV-9401
Category	VCR
Language	English