Panasonic Omnivision PV-9401 User Manual

necora Un a iape
*Important: Y
If the remote Soe HURLED Check list before you begin.
PROG, CH A/F, | NU RE O Al connections are made.
keys, INPUT, TAPE POSITION, or ADD/ O TV is turned on and set to the VCR channel (CH 3 or 4).
DLT button does not work when pressed, 0 Cassette with record tab in place
press the VCR button on the remote and C Remote in VCR moda `
try the button again. i
Model PV-9451 VCR
is shown here.
Insert a cassette.
« VCR power comes on
automatically.
=
0)
<
g
eu
O
&
J
(D
O
e]
=
2.
a
©
Record tab =
Select Channel.
Press CH A/W* or NUMBERED keys.
* To select “LINE”, see page 23.
* To select channels over 100,
first press 100 key, then enter
remaining two digits.
power
eer
von
Select
Recording
speed.
Co)
©
3
SPEED
(See
page
34.)
De
O
Press
SPEED.
ORD
VCR/TV
+
SP
=
Standard
Play
LP = Long Play
SLP = Super Long Play
. Selected speed is displayed on TV
screen and Multi Function ree and Multi Function Display. _
iS Start Recording.
Press REC.
* To edit out unwanted portions,
press PAUSE to pause and
resume recording.
W To stop --> Press STOP
E One Touch Recording
Press REC repeatedly to set the recording length
(30 min. ~ 4 hours).
* The VCR turns itself off at a preset time.
C Normal Rec —+0:30—» 1:00
ES
E Record One Program While Watching Another
Press VCR/TV--> “VCR” disappears on Multi Function Display
--> Select Channel at the TV.
Model PV-9451 remote is shown here. H Selecting Channel at the VCR
Press VCR/TV--> “VCR” appears on Multi Function Display
--> Select Channel at the VCR.
Multi Function Display
You can operate on the VCR
vcr 4 1 2
After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
Model PV-9451 VCR is shown here. M Press to stop.

Panasonic Omnivision PV-9401 Specifications

General

Brand	Panasonic
Model	Omnivision PV-9401
Category	VCR
Language	English