Panasonic Omnivision PV-9401 - Auto Shut-Off

pecial VUR Features
Time
Stamp
Feature
A
check
list
before
you
begin.
The VCR writes program data (see example below) about the first 10 LJ Clock is set to correct time.
seconds of every recording. The information is then displayed the first C Record tab in place. (See page 34.)
10 seconds of playback. To change the data, see “Changing Time
Stamp Data” on page 29.
1 Display menu.
Press ACTION.”
Display SET UP VCR.
1) Press AY to select.
2) Press to display.
2 SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
7» KEY
END ¿ACTION KEY
SET UP VCR
1) Press AY to select.
2) Press P to set.
REPEAT_PLAY
REMOTE WARNING
AUTO SHUT-OFF
SELECT: Y KEY
:> KEY * When “OFF” is selected, the program
END :ACTION KEY data is written on the tape, but will not
be displayed.
Return to normal screen.
Press ACTION twice.
<Time Stamp Example>
One Touch Recording
Timer Recording
12/27/1998 MON
An oe Ane 12/27/1999 MON When Clock is not set...
12:00PM - 1:00PM
CH 08 ABC MOVIE
MEMORIAL MOVIE ees
CH 08 ABC
Model PV-9451 remote is shown here.
28 For assistance, call 1-800-211-PANA(7262).