Panasonic Omnivision PV-9401 User Manual

Playback a lape
A check list before you begin.
O All connections are made.
O TV and VCR are plugged in.
O Tv is turned on and set to the VCR channel (CH 3 or 4).
O Remote is in VCR mode.
Insert a cassette.
+ VCR power comes on and VCR
appears on Multi Function Display.
Mode! PV-9451 VCR
is shown here.
Press PLAY.
* Playback begins if cassette has
no record tab.
E To Find a Particular Scene
Forward Search --> Press FF.
Reverse Search --> Press REW.
E For Slow Motion --> Press SLOW.
(To release, press SLOW.)
W For Still (Freeze) picture --> Press PAUSE.
(To release, press PAUSE.)
W For Frame by Frame picture --> Press SLOW in Still mode.
(To release, press PAUSE.)
a * To reduce picture noise, see “Manual Tracking Control” on
page 35.
* After the VCR is in Still or Slow mode for 3 minutes, it wilt switch to
Stop mode automatically to protect the tape and the video head.
REW
E To stop --> Press STOP.
W To rewind tape --> Press REW in Stop mode.
W To fast forward tape --> Press FF in Stop mode.
E To eject tape --> Press EJECT on the remote or
STOP/ EJECT on the VCR.
Model
PV-9451
remote
is
shown
here.
Playback
using
VCR
controls
1 Insert a cassette.
f
Note
)
2
Press
PLAY.
O To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
PV- ; , W Press to stop and/
Model
9451
VCR
is
shown
here
or
eject
tape.
8
For
assistance,
call
1-800-211-PANA(7262).

Panasonic Omnivision PV-9401 Specifications

General

Brand	Panasonic
Model	Omnivision PV-9401
Category	VCR
Language	English