The date and time is calculated, including leap
year, up to Dec. 31, 2089. This function
operates on a miniature battery (supplied).
1
2
Underside View
3
I How to remove the Battery.
®
'_ (D Bendthe lock tab outward.
Removethe battery.
REPLACE BA'FI'ERY WITH PANASONIC PART NO.
VSBW0004 (CR2025) ONLY. USE OF ANOTHER
BATI'ERY MAY PRESENT A RISK OF FIRE OR
EXPLOSION. CAUTION-BATTERY MAY EXPLODE IF
MISTREATED. DISPOSE OF USED BATTERY
PROMPTLY. KEEP AWAY FROM CHILDREN.
DO NOT RECHARGE, DISASSEMBLE OR DISPOSE
OF IN FIRE.
12
CLOCK
1
While pinching the stopper tabs, pull the
tray out of the Battery Compartment.
2
Insert the battery (supplied) into the
Battery tray with the e) mark facing down
until it snaps into place.
• Do not reverse the polarity.
3
Replace the Battery tray so that the small
triangle marks meet.
Note:
• Make sure your Palmcorder is off when
replacing the battery.
• Keep the Battery out of the reach of
children since swallowing it may be
harmful.
• When the Battery is installed improperly,
is discharged, or missing, the words
"CLOCK BATTERY" appears on the EVF.
• Battery life is approximately 5 years.
Connect the Palmcorder to a power source.
POWFJI
VCR _JIA
Set the POWER switch to VCR or
CAMERA.
Press SEL(ect) to start
the first portionflashing.
Press SET repeatedly (or hold down)
to enter the desired numbers.
Then, press SEL(ect) to fix that portion
and move to the next.
IRepeat until the hour, minute, month,
day and year have been entered.
4G
Press SEL(ect) again to lock in
all the settings and startthe clock.
Press DISPLAY twice to o,sPu_v
remove display from EVF.
Note:
Whenever "12:00AM JAN. 1 1994" appears,
itindicatesthat the clock needs adjustment.
To Next Page
Loading...
