Before you begin...
• Turn ON both units.
• Set the recording VCR's Input Signal
Selector to LINE.
• Set the Palmcorder POWER switch to VCR.
o monitor)
i
000
Connection
VHF Connecting Cable
(not supplied)
Audio
AudioNideo Cable
(supplied)
Palmcorder
1
Insert a pre-recorded tape
into the source (playing) Palmcorder and a
blank tape with record tab into the editing
(recording) unit.
Press PLAY on the (playing) Palmcorder.
Press STILL when the tape reaches the
point you want to start dubbing.
4 ÷m
Press PLAY and REC together then
immediately press STILL on the
recording unit.
Press STILL on the playing Palmcorder
and PAUSE/STILL on the recording unit to
begin copyingyour tape.
6 ÷m
Press STOP on both units when dubbing
is complete.
DC Input
Connector _.Video Outj_
DC Power
Cable
• Turn the TV ON and select its VCR
channel (either CH3 or CH4).
• Set the VCRiTV Selector on the
recording VCR to VCR.
DO Output
Connector
To AC Outlet
- CAUTION:
i
Unauthorized exchanging and/or copyingofl
copyrightedrecordingsmay be copyright
infringement.
25
To Next Page
Loading...
