Before you begin...
• Connect the Palmcorder to a power source
(Battery Pack, AC Adaptor or Car Battery Cord.)
• Insert a cassette with record tab (see page 11).
ECOR
AUSE |
utton j)
\
2
RNECORDING-"_
DICATOR .i)
EJECT_
POWER
OFF
EVF
Set the POWER switch
to CAMERA. Buit-ln
Lens Cover opens.
Record/Pause
mode.
Underside View
2
(PV-IQ404)
With the Eye Cup
against your eye, adjust Vision
the Vision Adjustment Control
Control to your eyesight.
SPEED I
3
SIP
Slide the TAPE SPEED Selector
for (SP or SLP). (Refer to page 11.)
,tU_10-HU P_
lip
(_) Slidethe Record Button Cover up
or down to protect or access the
Record button,
®
Press RECORD/PAUSE
to start recording.
The Tally Light and Recording Indicator
are lit during recording.
Press RECORD/PAUSE again to p_use
recording.
Helpful Notes:
• To remove the cassette
In Record/Pause mode, slide the TAPE
EJECT switch.
IiTo conserve power
I
fter 5 minutes Record/Pause will I
utomatically go into Standby mode.
I
o resume recording, set the POWER
witch to OFF and then CAMERA.
16
To Next Page
Loading...
