2
Indicator
[]
_B aot_nfiTmC;a rgiMagrke _ r_
Charge the Battery Pack fully before operation.
1
Plug in the AC Adaptor. BARRY
REFRESH
POWER CHARGE
lights up.
PowerIndicator
Insert the Battery
Slide the top of the Battery forward then
press down until it locks with a click.
• Battery Pack charges in about I hour.
BATTERY
REFRESH
Charge Indicatorlights up.
Remove the Battery
(A) Slide Battery forward.
(B) Lift up and out. BATTERY
REFRESH
POWER CHARGE
Charge Indicatorgoes out when
charging is done. (About one hour.)
• With a fully charged Battery Pack, you will
have about I hour of continuous use.
Use the Battery completely before
recharging.
Note:
After recharging the Battery Pack about 5
times, use the BA'I-rERY REFRESH
feature as explained on page 10.
*Use this marker as a reminderto yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and isfor your reference only.
8
2
1
To Attach the Battery
Align the battery with the top of the
mounting surface and press it firmly into
place until it locks with a click.
2
To Remove the Battery
While sliding the BATTERY RELEASE
button, remove the Battery from the
mounting surface.
-F"
To Next Page
Loading...
