Panasonic Panafax UF-7000 - Setup (SMTP Mail Server;POP3 Client)

20
Setting Machine
Authentication Method Setting
This species which authentication method is to be used by the User Authentication function.
Note:
When the User Authentication function is enabled, you must login to the machine before you can change settings. See the
following sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Login to the machine, and press
FUNCTION
SET
.
ENTER ACCESS CODE
Enter the access code (4-digit) set for the machine, and press
SET
.
ENTER ACCESS CODE
****
, and then press
SET
.
FAX PARAMETER(1-182)
NO.=
Select the authentication method.
SET
: Selects NTLM.
SET
: Selects CLEAR TEXT.
130 AUTH METHOD
2:NTLM
Press
STOP
to return to standby.