Panasonic Panafax UF-S2

b> The MERCURY Residential 132 and Pin Code Service
Entering One-Touch/Directory Search Dialling Numbers
The Mercury button can be used to help you to enter One-Touch/Directory Search dialling numbers. Instead
of entering either 132 or 131, Pause and PIN code at each time of entering the One-Touch/Directory Search
dialling number, you simply press the Mercury button followed by the desired telephone number.
If you want to retain the choice between British Telecom network and Mercury network, . just enter the
telephone number. (see Note 1)
To enter One-Touch/Directory Search dialling via Mercury network
1 Sel SPEED DIAL NOS.?
fh repeatedly until your request is displayed.
2
PRESS
ONE-TOUCH
fe \
Press a One-Touch button (1 to 4) or
DIRECTORY SEARCH _] and a 2-digit code (01 to 39).
1
Ex
* ONE-TOUCH
©
nist (see Note 2)
< 1>131-Been
< 1>132m
Enter the telephone number. (see Note 3) < 1>MMNN5551234
Ex:5 (5) 5) MI 2IB)4)
4
5
6 &®
v6
< 1713255512346
A
e
Vv
o co
bat =
Enter the station name using character button (up to 15
characters).
Ex:[P][AINI[AI[SI(0} NICE)
TON
[1] Note: 1. Only transmission from ADF is available in this operation. if you want to use memory transmission via
Mercury network, onter full number into One-Touch/Directory Search dialling number by using Mercury
button.
2. If 131 access is set in Mercury button, PIN code is not shown on the display.
3. You can enter the number up to 36 digits in total of the access code, [PAUSE | , PIN code and telephone
number.
4. After entering whole One-Touch/Directory Search dialling numbers, confirm the all numbers are entered
correctly by using One-Touch/Directory Search dialling number list (see page 78). If the PIN code is
entered in a One-Touch/Directory Search dialling, the PIN code is not printed out.
29