Panasonic Panafax UF-S2

Maintenance |
Cleaning the Document Scanning Area and Scanning Roller (White Roller)
If the receiving party reports that the received documents were black, or contained black lines, try making
a copy on your apparatus to verify. If the copy is black or has black lines, the document scanning area is
probably dirty and must be cleaned.
1
Cleaning the Scanning Glass
@ Open the cover by lifting the front corners.
@ Open the document guide plate by holding
the green lever.
@® Open the Front cover.
@ Gently wipe the scanning area with a cotton
wool bud.
The scanning area is scratched very easily,
so make sure you use a soft, dry cotton wool
bud.
© Gently wipe the scanning roller (White
Roller) by the cloth soaked with ethyl alcohol
pressing button repeatedly,
@ Close the Front cover.
@ Close the document guide plate by resetting
the green lever.
® Firmly close the panel cover by holding its
front edge at both sides.
If the receiving party reports that the received document has black vertical fine, try making a copy on your
apparatus to verify. if the copy has same vertical black line, the scanning glass must be cleaned.
—
=i
oiler
OF
ay
Until
the
cleaning
paper
is
fed
in
a
little,
@ Insert the cleaning paper into the document
guide until it is fed in a little.
@® Press button to eject the paper.
@ Repeat step 1 and 2 until black line is
disappears.
80
MAINTENANCE AND
TROUBLESHOOTING