Panasonic Panafax UF-S2

Fax (Basic) q
Manual Number Dialing
To dial the telephone number manually, follow the steps below:
1 DOCUMENT SET
Set the document face down into the Document Feeder.
BASIC FEATURES i
2 Enter a telephone number from the keypad.
Ex:
SIBIEGICIZISI)
5551234m
3 ON LINE * XMT *
fr
Your apparatus starts to dial the telephone number and
sends the document automatically.
4G
The Next Document Alarm will be heard when previous
document has been fed out.
Set next document within 5 seconds.
1 Note: 1. if you need a special access number to get an outside line, dial it first then press to enter a
pause (represented by a "-") before dialing the full number.
Ex: 9 [PAUSE | 5551234
2. To stop the transmission, press [STOP _].
3. When you hear the voice of the other party through the monitor speaker after step 3, lift up the handset and
tall the other party to prepare to receive a document. After you hear a beep, press and
replace the handset.
38