Panasonic Panafax UF-S2 - Page 50

> Receiving Documents
Setting the Reception Mode (IN Mode)
Following the procedure to set Telephone Mode (Manual Reception) or Fax/Tel auto switching Mode.
1 Sad BASIC SETTING ?
is repeatedly until your request is displayed.
2 DATE & TIME ?
START
ta
3 Sal RCV MODE (IN) ?
Ahn, repeatedly until your request is displayed.
> :MANUAL RCV
eer
)
Ws.
sFAX/TEL
=a
LY] Note: 1. To quit setting midway, press [STOP _].
2. When the fax answers the incoming call in Fax/Tel mode, the extension telephone will stop ringing.
If it is a voice call, the apparatus will start ringing.
You can change the number of rings that the apparatus will alert the caller in the FAX SETTING. (See page
75, 77)
You can select the number of initial rings before the apparatus answers by the [RING COUNTER] and set
the [SILENT RCV] to "OFF” to valid setting of [RING COUNTER] in the FAX SETTING. (See page 75, 77)
49